Changes to Step #10
Edit by Miguel Cruz —
Edit approved by Miguel Cruz
- Before
- After
- Unchanged
Step Lines
| + | [title] Prepare the Y-axis drag chain |
|---|---|
| + | [* 2] 1530mm 15x30 Drag Chain |
| + | [* 10] 2100mm for the SH ONE 1250x1250. |
| + | [* 3] The ends of the drag chain need to be oriented correctly |
| + | [* 10] If your drag ends are oriented as shown in the first image, skip to the next step |
| + | [* 4] Remove the drag chain end by either compressing or expanding the link in the chain, as shown |
| + | [* 10] Once removed, flip the orientation of the end and re-install it. |
| + | [* 10] It may be easier to remove the drag chain end by opening the drag chain link next to the end. The drag chain is designed to be opened to allow easier installation and maintenance. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added