Changes to Step #1

Edit by Miguel Cruz —

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Check if your X - Gantry is square
-[* 2] Push the X-Gantry foward
+[* 2] Push the X-Gantry forward
[* 3] The space between the XY_Joiners to the front plates should be the same.
[* 10] If the space is equal on both sides, you may skip to the next chapter.
-[* 4] If the space isn't equal and the gantry doesn't sit flush on front, please follow the next steps.
+[* 4] If the space isn't equal and the gantry doesn't sit flush in front, please follow the next steps.