Changes to Step #3

Edit by Miguel Cruz —

Edit approved by Miguel Cruz

Before
After
Unchanged

Step Lines

[title] Realign the Y-rails
[* 2] Tighten the carriage screws
[* 11] Align the Y-rails from the front to the back:
[* 3] Little by little move the gantry backwards.
- [* 4] Tighten the screw closest to the carriage as you move it.
- [* 10] Repeat to all screws along the rail.
+ [* 4] Tighten the screw on the rail closest to the carriage as you move it.
+ [* 10] Repeat for all screws along the rail.