Changes to Step #5
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Prepare the corner printed parts (4x) | |
| [* 2] compact_cnc_electronics_corner printed part | |
| [* 3] M3 heat insert | |
| [* 10] Install the M3 heat inserts into the indicated holes | |
| [* 10] Repeat for all 4 compact_cnc_electronics_corner printed parts | |
| + | [* 10] Set these assemblies aside until [guide|296|Step XX|stepid=3239] |