Changes to Step #7

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

-[title] Prepare the psu mount printed parts (2x)
+[title] Prepare the PSU mount printed parts (2x)
[* 2] compact_cnc_electronics_psu printed part
[* 3] M3 heat insert
[* 10] Install the M3 heat inserts into the indicated holes
[* 10] Repeat for both compact_cnc_electronics_psu printed parts
+[* 10] Set these assemblies aside until [guide|296|Step 15|stepid=3239]