Changes to Step #12
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the left panel - Part 2 | |
| [* 2] 1x compact_cnc_electronics_panel_collar printed part | |
| [* 3] 1x compact_cnc_electronics_panel_collar_nut printed part | |
| [* 9] Do not overtighten the printed nut as you can damage the printed parts | |
| + | [* 10] Set this panel assembly aside until [guide|296|Step XX|stepid=3239] |