Changes to Step #14

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Assemble the top panel
[* 2] 1x compact_cnc_top_panel
[* 3] 1x IPEX to SMA female WiFi pigtail
[* 4] Remove the marked nut from the WiFi pigtail, then insert the pigtail into the panel
[* 5] 1x SMA 2.4GHz Wifi antenna
[* 6] Secure the WiFi pigtail to the panel by reinstalling the nut
[* 7] Screw the WiFi antenna onto the WiFi pigtail
-[* 10] Set this panel assembly aside until [guide|296|Step XX|stepid=3239]
+[* 10] Set this panel assembly aside until [guide|296|Step 19|stepid=3243]