Changes to Step #16
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble the PSU |
|---|---|
| + | [* 2] Weho LRS-250-24 fanless PSU |
| + | [* 3] 2x PSU mount assemblies |
| + | [* 4] 4x M4x6 cap head screw |
| + | [* 10] Align the PSU mounts with the holes on the PSU. Secure them to the PSU using the M4x6 cap head screws |
| + | [* 9] Take care not to over-tighten the screws as you can damage the printed parts |
| + | [* 10] Set the PSU assembly aside until [guide|296|Step XX|stepid=3239] |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added