Changes to Step #16

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Assemble the PSU
[* 2] 1x Weho LRS-250-24 fanless PSU
[* 3] 2x PSU mount assemblies
[* 4] 4x M4x6 cap head screw
[* 10] Align the PSU mounts with the holes on the PSU. Secure them to the PSU using the M4x6 cap head screws
[* 9] Take care not to over-tighten the screws as you can damage the printed parts
-[* 10] Set the PSU assembly aside until [guide|296|Step XX|stepid=3239]
+[* 10] Set the PSU assembly aside until [guide|296|Step 25|stepid=3252]