Changes to Step #21

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Assemble the enclosure - Part 2
[* 2] 1x Enclosure assembly from the previous step
[* 3] Ensure the assembly is oriented as shown. Pay attention to the marked holes to help orient it correctly
[* 4] 1x Left panel assembly
[* 5] 4x M3x8 button head screw
-[* 9] Take care not to over-tighten the screws as you can damage the printed parts or the controller
+[* 9] Take care not to over-tighten the screws as you can damage the printed parts