Changes to Step #30
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Install the standalone feet | |
| [* 2] 1x Enclosure assembly | |
| [* 3] 4x Rubber foot with metal insert | |
| [* 4] 4x M6x16 cap head screw | |
| [* 5] Insert an M6x16 cap head screw into each foot and through hole in the base panel | |
| [* 6] 4x M6 locking hex nut | |
| - | [* 10] Proceed to [guide|296|Step |
| + | [* 10] Proceed to [guide|296|Step 34|stepid=3262] for the final steps |