Changes to Step #8
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Install the AXBB-E CNC controller - Part 2 | |
| [* 2] 4x M4 locking hex nut | |
| - | [* 3] Install an M4 locking hex nut on to each of the M4x25 screws and tighten to secure the AXBB-E CNC controller to the panel |
| + | [* 3] Install an M4 locking hex nut on to each of the M4x25 screws and tighten them to secure the AXBB-E CNC controller to the panel |