Changes to Step #10
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| - | [title] Wire the 5V |
|---|---|
| + | [title] Wire the 5V power supply |
| [* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires: | |
| [* 2] XXmm - 18AWG BROWN (A-Fork, B-Ferrule) (XX) | |
| [* 3] XXmm - 18AWG BLUE (A-Fork, B-Ferrule) (XX) | |
| [* 4] XXmm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (XX) | |
| [* 5] XXmm - 16AWG BLACK (A-Fork, B-Ferrule) (XX) | |
| [* 6] XXmm - 16AWG RED (A-Fork, B-Ferrule) (XX) | |
| [* 10] Connect all the wires above to the power supply, using the fork connectors on each wire | |
| [* 9] After insertion, attempt to pull the wire to verify that it is securely attached |