Changes to Step #13

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

+[title] Wire the 24V PSU
+[* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires:
+[* 2] XXmm - 16AWG RED (A-Fork, B-Ferrule) (XX)
+[* 3] XXmm - 16AWG BLACK (A-Fork, B-Ferrule) (XX)
+[* 4] XXmm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (XX)
+[* 5] XXmm - 18AWG BLUE (A-Fork, B-Ferrule) (XX)
+[* 6] XXmm - 18AWG BROWN (A-Fork, B-Ferrule) (XX)
+[* 10] Connect all the wires above to the power supply, using the fork connectors on each wire
+[* 9] After insertion, attempt to pull the wire to verify that it is securely attached

Image 1

No previous image

New image

Added