Changes to Step #20

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

-[title] Install both 48V PSUs - Part 2
-[* 2] 2x Meanwell RSP-320-48 48V PSU
-[* 10] Install the PSU as shown, securing it by screwing the M4x8 screws into the threaded holes on the side of the PSU body
-[* 3] Repeat to install the second PSU, paying attention to the orientation
-[* 4] Feed all of the wires from both PSUs through the designated slot
+[title] Install both 48V power supplies - Part 2
+[* 2] 2x Meanwell RSP-320-48 48V power supply
+[* 10] Install the power supply as shown, securing it by screwing the M4x8 screws into the threaded holes on the side of the PSU body
+[* 3] Repeat to install the second power supply, paying attention to the orientation
+[* 4] Feed all of the wires from both power supplies through the designated slot