Changes to Step #14

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Assemble the enclosure frame - Part 6
[* 2] 1x 1102mm 3060 extrusion
[* 3] Position the extrusion so the marked gap measures 80mm
[* 4] 1x 3030 cast 90 degree corner assembly
[* 5] Install a 3030 cast 90 degree corner assembly into the inner corner as shown
-[* 6] Tighten both M6x12 screws to secure bracket to the frame assembly
+[* 6] Tighten both M6x12 screws to secure corner assembly to the frame assembly
[* 10] Double check the 80mm measurement once the 3030 cast 90 degree corner bracket is secured