Changes to Step #17
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the enclosure top (x2) - Part 1 | |
| [* 2] 1x 1102mm 3030 extrusion | |
| - | [* 3] 2x Inside hidden three way corner assemblies |
| + | [* 3] 2x Inside hidden three way corner assemblies from [guide|301|Step 5|stepid=3318] |
| [* 4] Tighten the M6x8 set screws to secure the corners to the extrusion | |
| [* 10] Ensure the extrusion is flush and square with the both hidden three way corner assemblies before and after tightening the set screws | |
| [* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner |