Changes to Step #19

Edit by Simon Davie —

Edit approved by Simon Davie

Before
After
Unchanged

Step Lines

[title] Assemble the enclosure frame - Part 9
-[* 9] It is ***highly recommended*** to have a second person assist with installing the upper frame, and also to manipulate the frame in the following steps. The enclosure weighs roughly ***22KG*** without the panels installed
+[* 9] It is ***strongly recommended*** to have a second person assist with installing the upper frame, and also to manipulate the frame in the remaining steps. The enclosure weighs roughly ***22KG*** without the panels installed
+[* 9] The enclosure is ***large and heavy*** and can cause injury if it were to fall
[* 2] 1x Enclosure top assembly from the previous step
[* 3] 1x Enclosure assembly
[* 4] Align the inside hidden three way corner assemblies with the upright 3030 extrusions
[* 5] Once fully aligned and situated, tighten all M6x8 set screws to secure the enclosure frae together
[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner