Changes to Step #19
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the enclosure frame - Part 9 | |
| [* 9] It is ***strongly recommended*** to have a second person assist with installing the upper frame, and also to manipulate the frame in the remaining steps. The enclosure weighs roughly ***22KG*** without the panels installed | |
| [* 9] The enclosure is ***large and heavy*** and can cause injury if it were to fall | |
| [* 2] 1x Enclosure top assembly from the previous step | |
| [* 3] 1x Enclosure assembly | |
| [* 4] Align the inside hidden three way corner assemblies with the upright 3030 extrusions | |
| - | [* 5] Once fully aligned and situated, tighten all M6x8 set screws to secure the enclosure |
| + | [* 5] Once fully aligned and situated, tighten all M6x8 set screws to secure the enclosure frame together |
| [* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner |