Changes to Step #33
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the door hinges (x4) | |
| [* 2] 1x Hinge - metallic anodized for 3030 | |
| [* 3] 4x M6x14 countersink screw | |
| [* 4] 4x T-nut drop-in for 3030 - M6 | |
| [* 10] Loosely thread the 3030 T-nuts onto the M6x14 screws. Do not tighten them at this point | |
| + | [* 10] Set these assemblies aside until [guide|301|Step 35|stepid=3349] and [guide|301|Step 37|stepid=3351] |