Changes to Step #36
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| [title] Assemble the left door - Part 2 | |
| [* 2] 2x Door magnetic latch assembly from [guide|301|Step 34|stepid=3348] | |
| [* 3] Position the magnetic latch assemblies onto the upper and lower extrusions as shown. They should touch the 3030 cast 90 degree corners | |
| [* 4] Tighten the M6x12 marked screws to secure the magnetic latches to the door | |
| + | [* 9] Take care not to over-tighten the M6x12 screws as you can damage the nylon part |
| [* 10] Set this assembly aside until [guide|301|Step 40|stepid=3354] |