Changes to Step #60
Edit by Simon Davie —
Edit approved by Simon Davie
- Before
- After
- Unchanged
Step Lines
| + | [title] Assemble the top panel |
|---|---|
| + | [* 2] 1x panel_enclosure_mill_lid panel |
| + | [* 3] For each of the twelve marked holes, install the mounting hardware as shown in [guide|301|Step 22|stepid=3336] |
| + | [* 10] Loosely thread the 3030 T-nuts onto the M5x12 screws. Do not tighten them at this point |
Image 1
No previous image
Added
Image 2
No previous image
Added