Skip to main content
Help

Step Type:

Drag to rearrange

Insert the X Lead Screw through the Left Y-Plate hole. Right after the hole, insert the 3 parts below in order.

688ZZ Ball Bearing

Precision Shim 12x8x1mm

Lock Collar 8mm. Set in position, but don't tighten down yet.

Fasten your lead screw through the nut blocks on the X-Plate. Before the lead screw starts coming out through the Right Y-Plate, insert the 3 parts again, in reverse order this time.

Your contributions are licensed under the open source Creative Commons license.