Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Bondtech LGX Lite assembly from Step 9

Place the Bondtech LGX Lite assembly onto the top of the EVA3 assembly as shown

M3x8 Cap Head Screw

Fasten the two M3x8 screws through the drive_lgx_lite printed part into the EVA3 universal front

Take care not to over tighten the M3 screws as you can damage the printed parts

Your contributions are licensed under the open source Creative Commons license.