Thread the two Cap Head Screw M5x40 and two Cap Head Screw M6x12 screws through the motor_support_l part
The motor_support_l part is supposed to hold the screw heads tightly
Thread the support assembly through the motor_plate along with the remaining two Cap Head Screw M6x12 screws
Attach the 3030 M6 T-nuts. Don't tighten fully yet.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.