Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

The right motor drive is very similar to the left one with the difference that the bottom belt is driven so there are two idlers at the bottom and one on top

Attach the motor plate with the motor_support_r part and corresponding screws and nuts

Place the xy_cage_bottom printed part on the motor plate and thread the five shims with 3 smooth idlers on the M5 screws

Attach the top part

Do not over tighten or you will be compressing the bearings.

Unlike the in the left drive the pulley on the right drive has it's teeth downwards

Your contributions are licensed under the open source Creative Commons license.