Skip to main content
Editing Step 2 —

Step Type:

Drag to rearrange

You will use the micro shims only on the top and bottom of the toothed idlers. All other shims are the mini shims.

The toothed idlers are on the front and the smooth idlers are on the back of the XY Joiners.

The left XY Joiner has its toothed idler on top of the stack and the smooth one in the bottom.

It's the other way around for the right XY joiner - toothed idler in the bottom and the smooth one on top of the stack.

The tolerances on the XY Joiner parts are minimal and that's by design.

Your contributions are licensed under the open source Creative Commons license.