Slide the square nuts into the 2020 extrusion: 4 in the bottom slot and 2 in the top.
Slide the XY joiners on the 2020 exrusion
Watch out not to pinch your fingers!
Fasten everything together with 4x Cap Head Screws M5x10 from the bottom and 2x Cap Head Screws M5 12 from the top, those bolts need to firmly grab the square nuts that are in the profile
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.