Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Attach Cast Corner Brackets to the remaining profiles, as pictured, and connect them to the side frames by fitting the t-nuts inside the slots and tightening the screws.

Depending on your Workbench variant, you will have more or less C profiles. Adjust assembly accordingly and consult the table on the second image to understand how many profiles should be used at the top and at the bottom.

On the variant Workbench - Standard 1515, these 2 profiles are 4080 instead of 4040 (they have double the width shown in the picture). They should also use 4 additional corner brackets, connecting them to the top horizontal profiles.

Your contributions are licensed under the open source Creative Commons license.