Attach Cast Corner Brackets to the remaining profiles, as pictured, and connect them to the side frames by fitting the t-nuts inside the slots and tightening the screws.
Depending on your Workbench variant, you will have more or less C profiles. Adjust assembly accordingly and consult the table on the second image to understand how many profiles should be used at the top and at the bottom.
On the variant Workbench - Standard 1515, these 2 profiles are 4080 instead of 4040 (they have double the width shown in the picture). They should also use 4 additional corner brackets, connecting them to the top horizontal profiles.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.