Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 5 —

Step Type:

Drag to rearrange

The table top is not included in your kit, you will have to source it and have it cut locally. Check the table to identify table top dimensions for your specific Workbench size. We suggest sourcing a 20mm thick MDF board.

A Power Drill with drilling bits for wood of different diameters will be needed for this step. You will drill counterbore holes around your table top and place a screw with a T-Nut on each hole. Placing of the holes is left at your discretion. For larger workbenches, you may want to have some fixation points at the center too.

Workbench - Light / V-Core / V-Cast

Distance from table top edge to hole center: 15mm

Drill a through-hole with a 6mm drill and then make a counter-bore with a larger drill, to create room to lodge the screw head.

Workbench - Standard

Distance from table top edge to hole center: 20mm

Drill a through-hole with an 8mm drill and then make a counter-bore with a larger drill, to create room to lodge the screw head.

Your contributions are licensed under the open source Creative Commons license.