Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 10 —

Step Type:

Drag to rearrange

Pick up the tip of the Belt on the opposite side and slide it behind the other T-Nut, which should be placed near the end of the rail. Pull from the opposite side until the belt is snug against the rail.

Screw the remaining Knob on the T-Nut. Right before it locks in place, the knob will start biting the belt. When this happens, you can fine-tune the tension on the belt by moving the T-Nut slightly to the left or right.

Finish screwing the Knob to lock the T-Nut in place.

Cut off the remaining length of the Belt. You’re done!

Your contributions are licensed under the open source Creative Commons license.