Pending Edits to 02. X-Axis Gantry Assembly
Note: Accepting or denying any edit implicitly applies to all earlier pending edits to the same step or introduction.
Step #37 edited: [Step edited]
Edited by Jakub Koristka (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Prepare the Z-axis parts | |
| [* 2] 1x Rat Rig StrongHold PRO CNC - Z-Axis Plate | |
| [* 3] 16x M4x16 Cap Head Screw | |
| [* 4] 4x Rat Rig StrongHold PRO CNC - HG15 Spacer | |
| - | [* 5] |
| + | [* 5] 4x M5x14 Cap Head Screw |
Introduction edited
Edited by Matej (1)
(You don’t have enough reputation to patrol this edit.)
| Time Required Min |
12 hours
|
|---|---|
| Time Required Max |
16 hours
|