Pending Edits to 01. V-Hive Enclosure Base Model
Step #23 edited: [Step edited]
Edited by METAFORM (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Assemble the V-Hive Stacking Tabs | |
| [* 2] 2x M3x12 Cap Head Screw | |
| [* 3] 2x T-nut Drop in 3030 M3 | |
| [* 4] V-Hive stack locator printed part | |
| [* 10] Assemble 6x V-Hive stacking tabs. | |
| - | [* 5] Mount the stacking printed parts onto the top of the V-Hive enclosure by tightening the |
| + | [* 5] Mount the stacking printed parts onto the top of the V-Hive enclosure by tightening the M3x12 screws. |
| [* 6] Repeat for the other five parts. |