Help
Cosimo Santella
@cosimo
Cosimo Santella
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 09/12/2021 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 09/12/2021 | |
Yup, I did this!
Hi Russel, I was just about to comment on this RIGHT now! it seems we are in sinc! You can pre-load the tslots for the cap heap and the countersink to the SIDE of the cap head. This makes it possible to to slide the idler in from the back. Then insert in the tslot for the countersink in FRONT of the cap head when the idler is in place. Its easier to control a loose tslot when its on its back, and you have a good view to align the holes from the top. This would have saved me an hour of frustration!