What size struts did you try for your 500mm build? Knowing what you know now, what’s your best guess for the strength of the ideal strut?
thanks for this excellent tip!
if you are building the machine with an enclosure: first, make sure you’ve already installed the lower panel by now. second, you will want to install the top M6X20 screws first, and then install the lower screws after the unit is already in place.
it really sucks to find these instructions on Step 47(!) of the enclosure kit if you are building this printer from scratch. there should be a warning about this very early on in the build instructions for the printer (like maybe after step 15 in section 01) . it would be ideal to install the bottom panel before installing the motors, etc.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.