Help
Andy Langton
@bullwinkle
Andy Langton
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 01/22/2022 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 01/22/2022 | |
I did this but instead of using the teeth to mesh, I used tape to connect the two loose ends. Worked first try.
I’m following this for a dragon hot end, but I found that I did need to orient the dragon as shown for the V6, with the “longer” heater cartridge end facing front, otherwise it collides with the (new as-per Eva 2.4) tri-horn fan.