Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
427
What are the dimensions for the 500x500 kit?
2x ???mm 3030 Extrusion
3x ???mm 3030 Extrusion
2x ???mm 3030 Extrusion
Hole was too large for screw to form threads and it would not tighten. Using a 3/32 drill bit I drilled an additional 4mm into the printed part (there is nothing behind it) and then used two of the extra M3x12 screws
This took me one try after trying the other methods. Take a paper towel and tear it into a small strip about 2”x4” , fold it in half along the long end, then in half again but stop at 45degrees making a V shape. Insert this into the hole with the “ fin” down, as per Josh' and then place the nut into the paper towel V and pull it through until it is aligned with the hole. Using a long M3 insert it and get a few turns then pull the nut into position. Remove the long screw and install the M3x8.
This step is completely wrong. DO NOT CUT THE BELTS 24mm shorter than the EVA3 assembly. It will result in two belts that are too short to be used. I am now having to order two new belts and wait for delivery along with other numerous missing parts.