I don't get this right. As the guide says "47mm minus the thickness of your electronics panel" i thought I could use a 5mm MDF-panel cutted on my CNC. So the gap between the panel and the extrusion should be 42mm. Now I tried to put the motor plates in and get stuck, because the motor plate is 43mm, so I'm short of a mm.
So is 4mm the maximum for the electronics panel? Do I have to cut away the MDF panel for the motorplate? Can I move the electronics frame one mm further away, so I have a 43mm gap again?
Alright, sanded down the motor plates and moved the electronics frame a little bit further away and now it fits :)
I don't get this right. As the guide says "47mm minus the thickness of your electronics panel" i thought I could use a 5mm MDF-panel cutted on my CNC. So the gap between the panel and the extrusion should be 42mm. Now I tried to put the motor plates in and get stuck, because the motor plate is 43mm, so I'm short of a mm.
So is 4mm the maximum for the electronics panel? Do I have to cut away the MDF panel for the motorplate? Can I move the electronics frame one mm further away, so I have a 43mm gap again?
Thank you for this nice guide :)