Thanks for the tip. I followed your suggestion starting at step 6 to 11 and then 1 to 5 (with step 12 and 13 when finishing each x axis end) and then step 14 onward. Worked well without parts going everywhere
Thanks for the tip. My printed parts were super tight around the 2020 extrusion so loosening those M5 bolts and then forcefully making them skew back and forth and then pushing and pulling in the Z axis slowly worked it to a point where it was loose enough to slide freely.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Thanks for the tip. I followed your suggestion starting at step 6 to 11 and then 1 to 5 (with step 12 and 13 when finishing each x axis end) and then step 14 onward. Worked well without parts going everywhere
Thanks for the tip. My printed parts were super tight around the 2020 extrusion so loosening those M5 bolts and then forcefully making them skew back and forth and then pushing and pulling in the Z axis slowly worked it to a point where it was loose enough to slide freely.