Help
Francesco Brasina
@francesco_b
Francesco Brasina
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 02/13/2024 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 02/13/2024 | |
If you are not assembling a 300mm printer, you could have a different number of Electronics Wire Guide Body and Electronics Wire Guide Clip!!
If you have a 500mm you'll have 5 Electronics Wire Guide Body and 25 Electronics Wire Guide Clip
It would have been helpful if you had named and colored the parts as they are provided:
- 8x M3x18 Cap Head Screw
8x M6x20 Cap Head Screw
8x M3x12 Cap Head Screw
should have been black
- "Axial Thrust Bearing" is labeled as "Thrust bearing F8-16m" in the plastic bag
and in the step 1 image you don't show all the three parts
- "Rigid Lead Screw Coupler" is labeled as "Coupler Rigid Type BLK" in the plastic bag
- The orientation of the step motor is not shown until step 6, someone could not notice that and orient it the wrong way