Udrea Razvan

@ratrig since I can't comment on the commissioning guide I'll write this here, the link that is supposed to show how to wire the bed heater is the same as the AC wiring, so there are no instructions on how to actually wire up the bed heater

the m3x8 cap head screw should be inserted into the printed part before the m3x35 screw since it intersects with its path

the m3x35 screw that goes trough the entire part requires a ludicrously long hex key, maybe this should appear in the first part of the guide while preparing the tools necessary

i'd also add :

-soldering iron (for heat inserts)

-a pair of pliers or a set of hex wrenches(for tightening the hex locking nuts)