I accidentally flashed v2.0.2. It worked in that i was able to get mainsail up, and all temperature readings were coming back accurately. I realized my mistakes, reflashed the boards to v2.1.0, and now my nozzle temp sensor is reading -125C. I learned that the pull-up resistor value in the config is incorrect on 2.1, and must have been correct on 2.0. To fix this, I went into RatOS.cfg and changed pullup_resistor: 4700 under the [extruder] section.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
I accidentally flashed v2.0.2. It worked in that i was able to get mainsail up, and all temperature readings were coming back accurately. I realized my mistakes, reflashed the boards to v2.1.0, and now my nozzle temp sensor is reading -125C. I learned that the pull-up resistor value in the config is incorrect on 2.1, and must have been correct on 2.0. To fix this, I went into RatOS.cfg and changed pullup_resistor: 4700 under the [extruder] section.