Help
Michael Smythe
@slimohan
Michael Smythe
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 11/17/2024 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 11/17/2024 | |
The screws to hold the rear panel should be about 2mm longer. 12mm is just short enough to be a real pain in the rear.
My advice is do everything except installing the lead screws. If you install the lead screw arms on the carriages first you can thread the lead screw through the top and down into the coupler on the motor shaft. It's much easier this way.