Help
Scott Suleski
@ssuleski
Scott Suleski
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 11/22/2024 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 11/22/2024 | |
While you are working on the bottom and running the wires it is a good time to install the panels holders for the door if you are doing an enclosure Chapter13 Steps 14 & 20. Note these panel holders in the parts kit are for 3mm panels if you are using 6mm then you will have to print different parts.
These panel holders are if you have 3mm panels. if you have 6mm panels you will need to print different parts