For IDEX is quite easy.
You can wire the cables as shown in the diagram, to HE3 (PB11) and HE2 (PB10).
Then add this line of code to the printer.cfg:
[fan_generic part_fan_t0]
enable_pin: PB10
[fan_generic part_fan_t1]
enable_pin: PB11
That did the trick for me
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
For IDEX is quite easy.
You can wire the cables as shown in the diagram, to HE3 (PB11) and HE2 (PB10).
Then add this line of code to the printer.cfg:
[fan_generic part_fan_t0]enable_pin: PB10[fan_generic part_fan_t1]enable_pin: PB11That did the trick for me