-
-
Since there are multiple Workbee variants, this guide won't mention profile and lead screw lengths for the X and Y axis, as these vary. Instead, the guide will refer to each profile and lead screw by the names described on the table. You may want to label/group these parts right now to prevent assembly mistakes and make your job easier.
-
Lead Screw
-
2040 Profile
-
2080 Profile
-
C-Beam Profile
-
-
-
Use this table to understand what size table and what size Spoiler board you will need for your specific machine variant.
-
Maximum material thickness (for 12mm thick Spoilerboard): 94mm
-
Maximum cutting depth (for 12mm thick Spoilerboard): 47mm
-
Machine size is equal to the C-Beam extrusions lengths that make up the frame. Your variant is named according to these sizes.
-
Working area is the maximum workable area.
-
Spoilerboard size is the maximum size of the spoilerboard.
-
Footprint is equal to the minimum table size that is required for the WorkBee to sit on.
-
The WorkBee requires a physical volume which is greater than the footprint. This is the overall machine volume. This is equal to the minimum physical space which is needed.
-
