Skip to main content
/

Site Navigation

Your Account

Choose Language

  1. The belt is shipped as one piece - cut it in half
    • The belt is shipped as one piece - cut it in half

    • Total belt lengths according to machine size:

    • 300 - 4.2m

    • 400 - 5m

    • 500 - 5.8m

  2. The printed parts are made with sacrificial layers. You will notice that some holes are "blinded" with a thin layer of plastic. That layer needs to be removed.
    • The printed parts are made with sacrificial layers. You will notice that some holes are "blinded" with a thin layer of plastic. That layer needs to be removed.

    • You can use a screw driver, a drill, an Allen key to make short work of those layers

    • On a few occasions you will need to properly insert a hex nut in its socket

    • This needs to be done properly and the angle of the nut needs to be almost perfect

    • Failing to properly seat a hex nut will result in thread binding and will make it almost impossible to rescue a part!

    • Watch the animation showing how to seat a hex nut

  3. Machine sizes above 300: You will see a bag labeled Specific parts. This bag includes extra fasteners for your MGN linear rails, which are longer than the ones on the 300 version.
    • Machine sizes above 300: You will see a bag labeled Specific parts. This bag includes extra fasteners for your MGN linear rails, which are longer than the ones on the 300 version.

    • If you're concerned that parts may be missing, check the kit BOM.

Finish Line

43 other people completed this guide.

Paweł Kucmus

Member since: 11/08/2020

10,810 Reputation

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 55

Past 30 Days: 332

All Time: 17,699