01. Rat Rig V-Core 4 preparation

Written By: Rat Rig
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

Flags

0

    • Store all components securely, as they will be reused in the next chapter.

    Edit

  2. Remove the M3x40 Countersink screw Remove the 3x6x30mm spacer Remove the four M6x12 Cap head Screws

    • Remove the M3x40 Countersink screw

    • Remove the 3x6x30mm spacer

    • Remove the four M6x12 Cap head Screws

    • Partially unthread the M5x45 cap head screws, but do not remove them completely; just disengage them from the hidden M5 locking nut

    • Remove the top assembly as shown

    Edit

  3. Remove all the M6x12 Cap Head Screws Remove the stepper motor assembly from the V-Core 4 Remove the stepper motor assembly from the V-Core 4

    • Remove all the M6x12 Cap Head Screws

    • Remove the stepper motor assembly from the V-Core 4

    Edit

  4. Remove the M6x12 Cap Head Screws Remove the 3030 M6 T-nuts Remove the ball bearing

    • Remove the M6x12 Cap Head Screws

    • Remove the 3030 M6 T-nuts

    • Remove the ball bearing

    • Remove the 5x8x4mm spacers

    Edit

  5. Remove all the bearings from the screws Remove the mini precision shim Remove the 5x8x14mm spacer

    • Remove all the bearings from the screws

    • Remove the mini precision shim

    • Remove the 5x8x14mm spacer

    • Remove all the bearings from the screws

    Edit

  6. Untighten the set screw on the stepper motor pulleys Remove the pulleys from the stepper Remove the Stepper motor

    • Untighten the set screw on the stepper motor pulleys

    • Remove the pulleys from the stepper

    • Remove the Stepper motor

    Edit
Finish Line

Author

Rat Rig

Member since: 07/10/2020

30,596 Reputation

105 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 60

Past 30 Days: 174

All Time: 174