Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Install the component using the designated holes. 2x M4x8 Cap Head Screw + M4 Washer Power Supply Weho - 350Watt 24V
    • Install the component using the designated holes.

    • 2x M4x8 Cap Head Screw + M4 Washer

    • Power Supply Weho - 350Watt 24V

    • Install the Power supply as shown.

  2. Install the component using the designated holes. 4x Hex Locking Nut - M3 4x Nylon Spacer - 3.2x6x16mm
    • Install the component using the designated holes.

    • 4x Hex Locking Nut - M3

    • 4x Nylon Spacer - 3.2x6x16mm

    • BigTreeTech & Rat Rig - Rodent CNC Controller TMC2160

    • 4x M3x25 Cap Head Screw

  3. Install the component using the designated holes. 4x Hex Locking Nut - M4 CNC Electronics Contactor
    • Install the component using the designated holes.

    • 4x Hex Locking Nut - M4

    • CNC Electronics Contactor

    • 4x M4x16 Cap Head Screw + M4 washer

  4. Insert wisdom here Insert wisdom here Insert wisdom here
    • Insert wisdom here

Rat Rig

Member since: 7/10/20

48,550 Reputation

105 Guides authored

View Statistics:

Past 24 Hours: 22

Past 7 Days: 158

Past 30 Days: 732

All Time: 7,394